Hydraulic hose assemblies
- Wire-braided and spiral hose
- High-pressure hose for heavy plant
- Thermoplastic hose for lifts and tools
Hose Assembly
Hydraulic hose assemblies, made to order
Hydraulic and industrial hose assemblies made to specification, with crimping, fittings and pressure testing, for excavators, loaders, cranes, trucks, factory machines and oilfield equipment.
What we make
Hose assemblies for every pressure and fluid
Industrial hose
- Water, air and oil hose
- Suction and delivery hose
- Chemical and fuel transfer hose
Stainless steel hose
- Corrugated braided hose
- High-temperature and steam lines
- Gas and vibration connectors
Fittings and accessories
- Crimp fittings and ferrules
- Adapters and quick couplers
- Hose guards and sleeves
How we work
How a hose assembly is made
The steps our technicians follow for every assembly.
Hydraulic hose assembly
Made up to your length and fittings, for excavators, loaders, cranes, trucks, factory machines and power packs.
- Hose types
- Hydraulic, industrial and stainless steel
- Fittings
- BSP, JIC, ORFS, NPT, metric and flange
Identify the hose
We read the print on the old hose, measure the bore and length, and gauge the threads and fitting angles at both ends. A photo of the hose and both fittings is often enough.
Cut to length
New hose is cut square on a hose saw so the fitting seats fully and the reinforcement wire is not frayed.
Skive where needed
For hose and fittings that require it, the outer cover is removed so the ferrule grips the wire braid directly.
Crimp the fittings
The fittings are pushed fully home and crimped to the manufacturer's diameter for that hose and ferrule, then checked with a caliper.
Test, clean and cap
Assemblies are pressure tested where specified, flushed to remove cutting debris, checked for fitting orientation and capped at both ends so no dirt reaches your system.
Product range
Hose and fittings we assemble
Common hose constructions and fitting standards. Ask us for sizes, pressure ratings and stock.
| Type | Standard | Construction | Typical use |
|---|---|---|---|
| 1SN | EN 853 / SAE 100R1 | One high-tensile steel wire braid | Medium-pressure lines, return lines |
| 2SN | EN 853 / SAE 100R2 | Two high-tensile steel wire braids | General hydraulic pressure lines |
| 4SP | EN 856 | Four spiral steel wire layers | High-pressure lines, impulse service |
| 4SH | EN 856 | Four heavy spiral wire layers | Very high pressure on heavy plant |
| R12 / R13 / R15 | SAE 100R12, R13, R15 | Four or six spiral wire layers | Severe-duty and high-impulse circuits |
| R7 / R8 | SAE 100R7, R8 | Thermoplastic with fibre braid | Lifts, tools and non-conductive lines |
| Fitting | Standard | Sealing | Common in |
|---|---|---|---|
| BSP | ISO 1179 / BS 5200 | 60° cone or bonded seal | European and Asian machinery |
| JIC 37° | SAE J514 | 37° flare | American machinery |
| ORFS | SAE J1453 | O-ring face seal | Leak-free high-pressure circuits |
| NPT | SAE J516 | Tapered thread | Pumps, gauges and ports |
| Metric DIN 24° | ISO 8434-1 | 24° cone | European plant and trucks |
| SAE flange | ISO 6162 code 61 / 62 | O-ring, bolted flange | Large-bore pump and cylinder lines |
Standards listed are those commonly supplied. Confirm the exact hose, fitting and pressure rating with us for each order.
Send us a hose to match
Send these on WhatsApp and we can usually quote without seeing the hose.
- A close-up photo of both fittings
- A photo of the print along the hose
- Overall length, measured fitting to fitting
- The angle between bent fittings, if any
- Working pressure and the fluid it carries
When to replace a hose
A burst hose stops a machine and can injure people nearby. Replace it if you see any of these.
- Cracked, worn or blistered outer cover
- Exposed or rusted wire reinforcement
- Leaks or weeping at the fitting
- Kinks, flattening or bulges
- Corroded or damaged fittings
Machine down with a burst hose?
Send a photo of the hose and both fittings, and we will make it up.
+968 991 01 991www.galaxyoman.com
Contact
Contact us
Call, WhatsApp or email the right office, or prepare an enquiry below.
Head office
Phone+968 991 01 991
Emailinfo@galaxyoman.com
WhatsApp+968 991 01 991
Muscat
Phone+968 9280 9673
Emailmuscat@galaxyoman.com
Sohar
Phone+968 9511 7223
Emailarun@galaxyoman.com
Salalah
Phone+968 9536 1699
Emailhydsll@galaxyoman.com